Tech Support
 Technical Data
Performance Properties
  Fungal Resistance
  Bacterial Resistance
  Flammability
  Toxicity
  Emission analysis for TVOC
  Thermoforming
  Chemical Resistance
  Product Dimensions
  Integrated Components
 Care & Maintenance
 Warranty
  Residential
  Commercial
 Greenguard Certified
 LEED
 MSDS
  Sheets
  Sinks and Bowls
 Writing Specifications
  Solid Surfaces Fabrications
  Solid Surfaces Countertops
 FAQ
 warranty registration
Tech Support
Performance Property
    " Staron® Solid Surfaces make an elegant, hygienic
            and easy-to-maintain surface in any kitchen "
The information contained herein is provided by Cheil Industries, Inc. and its subsidiaries and affiliates (collectively referred to as "Samsung") for information purposes only and should be used by individuals with technical experience and knowledge in the area. Samsung does not make any representation or warranties of the usefulness or expected result of the information, and does not assume any responsibility whatsoever related to the use of the information. Exclusion of the implied warranties may not apply in certain jurisdictions.

PROPERTIES TYPICAL RESULTS TEST PROCEDURE
 Tensile strength  6,000 psi  ASTM D 638
 Tensile modulus  600,000 psi  ASTM D 638
 Flexural strength  10,000 psi  ASTM D 790
 Flexural modulus  1,000,000 psi  ASTM D 790
 Elongation  0.5%  ASTM D 638
 Hardness  92 Rockwell "M" Scale
 65 Barcol Impressor
 ASTM D 785
 ASTM D 2583
 Thermal expansion  2.0 x 10-5 in/in F¢ª  ASTM D 696
 Gloss (60 Gardner)  Between 5 - 20  NEMA LD-3
 Color stability  No change-200hrs  NEMA LD-3
 Stain resistance  Pass
 Rating 41
 ANSI Z 124
 Abrasion resistance  Pass  ANSI Z 124
 Boiling water surface resistance  No effect  NEMA LD-3
 High temperature resistance  No effect  NEMA LD-3
 IZOD Impact resistance (notched)  0.28 ft.lbf/in  ASTM D 256
 Ball drop
 1/2"(12.3 mm) sheet
 144" w/ 1/2 lb ball, No failure  NEMA LD-3
 Fungi and Bacterial resistance  No growth  ASTM G 21, G22
 Specific gravity
      Solid colors
      Patterened colors
 
 1.72
 1.69
 ASTM D 792
 Water absorption  0.04%, (1/2", 24hrs)
 0.11%, (1/8", 24hrs)
 ASTM D 570
 Flammability
     Flame spread
     Smoke density
 Class A / Class 1
 10
 10
 UBC 8-1
 ASTM E 84
 ASTM E 84
 Radiant heat resistance  No visual effect  NEMA LD-3
 Toxicity  84.4g (Solid Color)
 81.8g (Patterned Color)
 Pittsburgh Test Protocol
 (LC50 Test)
                Home | Staron® Near You | Tech Support | Media Center | Colors | Gallery | Faq

2006 Cheil Industries, Inc. All Rights Reserved.