 |
| Tech Support |
|
| Chemical Resistance |
|
|
" Staron® Solid Surfaces make an elegant, hygienic
and easy-to-maintain surface in any kitchen " |
|
|
|
|
|
1. Test method
- Apply 3 drops of each chemical reagent on the surfaces of Staron® Solid Surfaces
- Expose the sample for 16 hours; covered with glass plate and uncovered
- Check the surface and scrub the surface with a wet Scotch-Brite® Pad
and bleaching cleanser such as Ajax®
2. Test Result
- THE RESIDUE FROM THE FOLLOWING CHEMICAL REAGENTS CAN BE REMOVED WITH A
WET SCOTCH-BRITE PAD AND BLEACHING CLEANSER.
|
|
Acetic acid (10%)
Ammonia
Amyl acetate
Ball point pen
Bleach (household type)
B-4 body conditioner
Carbon disulfide
Citric acid (10%)
Cigarette (nicotine and tar)
Cooking oils
Cupra ammonia
Ethanol
Ethyl ether
Gasoline
Grape juice
Household soaps
Hydrogen peroxide
Ketchup
Lipstick
Methanol
Methyl orange (1%)
Mineral oil
Nail polish
N-hexane
Pencil lead
Permanent marker pen
Soapless detergents
Sodium hydroxide solution (5,10,25,40%)
Sodium sulfate
Sugar (sucrose)
Sulfuric acid (25,33,60%)
Tetrahydrofuran
Tomato juice
Uric acid
Washable inks
Xylene
|
Acetone
Ammonium hydroxide (5,28%)
Amyl alcohol
Benzene
Blood
Butyl alcohol
Carbon tetrachloride
Calcium thiocyanate (78%)
Coffee
Cottonseed oil
Dishwashing liquid/powders
Ethyl acetate
Formaldehde
Gentian violet
Hair dyes
Hydrochloric acid (20,30,37%)
Iodine (1%)
Lemon juice
Mercurochrome (2%)
Methyl ethyl ketone
Methyl red (1%)
Mustard
Naphthalene
Olive oil
Perchloric acid
Shoe polish
Sodium bisulfate
Soy sauce
Sulfuric acid (25,33,60%)
Tea
Toluene
Urea (6%)
Vinegar
Wine
Zinc Chloride
|
|
|
- THE FOLLOWING CHEMICAL REAGENTS MAY AFFECT THE SURFACE WITH MORE SERIOUS DAMAGE, REQUIRING SANDING FOR COMPLETE REMOVAL. FREQUENT AND/OR PROLONGED EXPOSURE TO THESE REAGENTS SHOULD BE AVOIDED.
|
- Acetic acid (90,98%)
- Acid drain cleansers
- Chlorobenzene
- Chloroform (100%)
- Chromic trioxide acid
- Cresol
- Dioxane
- Ethyl acetate
- Equalizing mix (50/50)
- Film developer
- Formic acid (50,90%)
- Furfural
- Glacial acetic acid
- Hydrofluoric acid (48%)
- Luralite mix (50/50)
- Methylene chloride based products such as paint removers,
brush cleansers and some metal cleansers
- Nitric acid (25,30,70%)
- Phenol (40,85%)
- Phosphoric acid (75,90%)
- Sulfuric acid (77,96%)
- Trichloroacetic acid (10,50%)
- 3M Avagard TM D
|
|
|
|
|
