답변Not necessarily, although lighter colors show wear less visibly and require less frequent maintenance. All Staron® Solid Surface colors will provide many years of dependable service.
Note: Consult with a sales associate or fabricator to choose a Staron® or Tempest color that is best suited for your particular project. Like most materials, dark colors, and particularly dark colors that have been finished to a high gloss will potentially show scratches or abrasion marks. Therefore, it’s best to keep in mind that a dark surface color and a high gloss finishes generally requires additional care and maintenance. However, if scratches occur over time, the surface can easily be resanded and refinished. Refinishing must be performed by a certified Fabricator/Installer and, typically, you will be charged at the standard hourly service rate.
답변Yes, Staron® Solid Surfaces are inherently nonporous, with smooth, impenetrable seams. Unlike other surfaces such as laminate, tile and granite, Staron® Solid Surfaces have no grout lines or ridges to trap dirt and germs. This exceptionally smooth surface makes Staron® surfaces easy to clean. Staron® Solid Surfaces can be fabricated as one continuous surface to further reduce areas for bacteria to grow.
답변There are several edge treatments that you can incorporate with your countertop design. Edge profiles, Samsung Chemical USA. Copyright® 2010 Samsung SDI Co., Ltd. Staron®, is a registered trademark and are included in the “Design Option” section of this site. If you don't see the edge treatment you have in mind, talk to your local builder or fabricator. In addition to edge treatments, color inlays can be incorporated as well as special features such as heat rails next to stoves for hot items and routed drainage channels leading to the sink.
답변With proper care and maintenance, your Staron® Solid Surfaces countertops will last for many years. Staron® Solid Surfaces are considered as renewable materials and can be refinished to look new, and are backed by a 10‐year limited warranty.
답변Staron® Solid Surfaces can be finished in your choice of matte, semi‐gloss and high‐gloss finishes. Consult with a sales associate or fabricator to choose a finish option that is best suited for your particular project.
답변Cutting directly on any countertop surface is not recommended. We recommend always using a cutting board. Fortunately, Staron® Surfaces can be easily repaired if a surface nick or scratch should occur.
답변Yes. Because Staron® Solid Surfaces are nonporous, germs and bacteria have nowhere to accumulate. In fact, Staron® Solid Surfaces are one of the few surfaces approved for food preparation areas in restaurants. Before preparing a meal, always make sure that the surface is clean. Do not allow other food to come into contact with a surface where raw meats have been placed until the surface is thoroughly sanitized, preferably with a weak bleach solution. After sanitizing, immediately rinse and clean the surface with water ‐ leaving food residue on the surface to air dry can result in a stubborn stain.